EBS OctaBass OCTAVER פדל אפקט לגיטרה בס
Preserve the low range
Suitable for live and studio use
Triple Mode Octave Divider
High, Mid and Low Ranges
Controls for Normal and Octave volume
True Bypass Signal Relay Switching
THE EBS OCTABASS STUDIO EDITION ANALOG OCTAVE DIVIDER CREATES A SINGLE NOTE ONE OCTAVE BELOW THE PITCH OF THE PLAYED NOTE, ADDING A NEW DIMENSION TO YOUR SOUND.
Track your note. The pedal recognizes two or three-note chords and trigger the lowest note. Control the level of the original tone and mix in the octave effect. Choose between High, Mid or Low Range – which relates to the character of the sound of the sub-note.
Hints. Sub-notes are perhaps most effective when playing on the higher frets, and could add a nice touch just slightly blended into the original tone, especially on a solo on bass or guitar. The OctaBass works really good together with distortion as well, but remember to keep the OctaBass before the drive in the signal chain, so it get’s as clean as possible tone to trigger. If you are after a synth-bass type of sound, a great way to achieve that is to run an OctaBass, combined with an EBS BassIQ envelope filter, and use the ‘Down’mode on the IQ. That makes the impression of hitting a key on a keyboard, and adds that sub-bass as well as synth sound to the tone.
The original EBS effect! The OctaBass was the very first stompbox effect from EBS. This classic effect was introduced in 1992, and based on an onboard effect featured in the legacy EBS Taurus combo. It has become ‘classic’ after being a trusted companion to legendary bassists like Tony Levin, Roger Glover, Tal Wilkenfeld & many many more…
Nominal Input Level -8 dBv
- Input Impedance 700 kohms
- Dry Bandwidth +0 / -2 dB 20 – 20k Hz
- Dry Level min / max -oo / 0 dB
- Dry Noise Level -96 dBv
- Octaver Bandwidth +0 / -3 dB 10 – 110 Hz
- Octaver Level Gain min / max -oo / 12 dB min
- Octaver Filter Slope 18 dB/oct. Low pass
- Low Pass Triggering Threshold -70 dBv @200 Hz
- Dimensions (L x W x H) 2.8 x 4.5 x 1.4” (70 x 115 x 35 mm)
- Weight 400g (0.88 lb.)
- Bypass True Bypass
Power Requirements 9-12 V DC Regulated, 30 mA max